24VDC Digital Temperature controller
This Device use for monitoring or controlling Temperature with 24 VDC. It can be powered directly by the battery 24 VDC . It shows current temperature and also your set point (alarm temperature that you can set it on device). It has 2 relay switch, one relay output and also one over alarm relay output that each output switch separately can be used to turn on or off a circuit. The controller display the temperature on Celsius or fahrenheit. The max temperature range for this device with K type thermocouple is 1300 C or 2000 F
Control Method |
PIN control (including ON/OFF, step-type PID and continuous PID) Self-tuning control |
Detective Temperature Range |
0 to 1300 °C (with K type) or 2000 F |
Display |
Process value (PV), Setting value (SV) Output, alarm and self-tuning can be indicated by: LED |
Input Signal |
Thermocouple: K, J, T, E - Cu50, PT100 |
Accuracy |
±0.5%F.S |
Control Way |
Fuzzy PID control, state control manual |
Control Output |
- Relay output.
* Equipped with a built-in relay (5Amp). * Out1= Relay (heating side or cooling side selectable). |
Alarm output |
High limit alarm, lower limit alarm,
below lower limit alarm. Equipped with a built-in relay 3Amp |
Proportional Band |
Selectable for control output |
Integration time |
1-3600 S |
Derivative time |
1-3600 S |
Working Power |
24VDC |
Out Dimension |
48 x 48 x 90 mm |
Install Dimension |
45 x 45 mm |
24 VDC Digital PID Temperature Controller °C °F relay output
- Product Code:DTXG-24V
- Availability:In Stock
-
USD28.50