This heavy-duty plug-and-play temperature controller with a circuit breaker has a wide range of applications for controlling the temperature. It can work for any application of controlling heat and cold with a temperature range of -22 to 572 F ( 0 to 300 degrees C ).

You can select between 10, 15, or 20Amp/120VAC and also with or without a waterproof cover for outside use.

Main Features:

·          To operate, you only need to plug the heater or cooler into the socket wire of the controller at the back, drop the sensor into place, turn on the power of the controller Box, and set up the controller to your own requirements.

·          10, 15 or 20 Amp Circuit Breaker switch for safety(please select)

·          Heavy duty input and output plug and socket wires

·          With or without a waterproof cover for outside use (Please select)

·          It equipped with 2 types of timer 

·         Configurable between Fahrenheit or Celsius

·          Heating or cooling function (configurable)

·          It is the accurate controller with 0.1 C or 0.1 F resolution controlling

·          Temperature Calibration

.          Equipped with buzzer alarm for high or low-temperature alarm setting

This thermostat simply turns off the Heater or cooler when it reaches the specified temperature.

We will ship the temperature controller with 110 V or 220 V versions based on the voltage of your country. For example, if you are customers from the United States, Canada, Mexico, Japan, Venezuela, and Taiwan, we will ship 110 V versions. For customers from Europe, Australia, New Zealand, most Asian Countries, South America and Africa, we will ship 220 V versions.

Temperature Controller Specifications

• Temperature Measuring Range: 

  -22 to 572 F ( 0 to 300 degrees C )

• Control temperature range: 

  -22 to 572 F ( 0 to 300 degrees C )

   (adjustable)
• Control temperature difference: 0.1 - 25 degrees (adjustable)
• controlling Resolution: 0.1 degree
• Timer : 0-999 minutes
• Sensor error delay: 1 minute
• Compressor delay protection time: 0 ~ 10 minutes (adjustable)  
• Storage Temperature: -30 ~ 75 °C
• Operating Relative Humidity: 20 ~ 85 % (No condensation)  
• Power Supply: 100-120 V AC/DC (depends on your country)
• Power consumption: < 2 W
• Cable length: 3 m (near to 10 feet)
• Equipped with AH or AL buzzer alarm (Higher or Lower temperature alarm setting) 

 Thermocouple Specification

• Measurement range: 

  -22 to 572 F ( 0 to 300 degrees C )

   
• Cable length (L): 10 ft ( 3m ) 
• Sensor type: Negative Temperature Coefficient NTC sensor  100K

Notes for customers outside North America,

• For international orders, a US power cord is included. Users can cut the plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
• For countries that use 220-240 VAC power lines, the maximum control power of this controller is 1100 Watts.

Manual & wiring diagram