This
heavy duty plug and play controller serves the purpose of monitoring and
controlling temperature and humidity levels. Equipped with a buzzer and flasher
alarm, it alerts users when the maximum or minimum limits are exceeded,
preventing potential damage. For example, if humidity rises in a basement due
to a faulty dehumidifier or water leakage, the controller triggers an alarm
sound. The same applies to temperature thresholds. It also has two relay
outputs outlets for controlling temperature or humidity devices.
Additionally, the
controller records the maximum and minimum temperature and humidity values
during operation, allowing for better customization and efficient control.
This
versatile unit empowers you to effortlessly regulate both humidity and
temperature in your environment. Just plug this box into a wall socket and
connect your Humidifier, Dehumidifier, and Heater or Cooler systems to its dual
outputs. By doing so, you gain precise control over the humidity and
temperature levels with convenience. The unit is equipped with a digital LCD
display that provides clear readings of the current humidity and temperature
degrees, enabling easy monitoring and adjustment as per your requirements.
Technical
Parameters:
·
Accuracy: ±1°C, 0.1%RH
·
Power consumption: <3W
·
Temperature measuring range: -20°C to
+80°C
·
Humidity measuring range: 0%RH to
+100%RH
·
Sensors: Humidity and temperature
sensor with 1m wire length
·
Power supply: AC 100-240V
·
Output: 2 outputs with 10 Amp load
Features:
·
Two relays with one sensor and two
independent outputs
·
High and low buzzer alarm and flasher
for temperature and humidity
·
Two-color display (red for
temperature and blue for humidity)
·
Control of temperature and humidity
by setting start and stop values
·
Temperature and humidity calibration
·
Recording of maximum and minimum
temperature and humidity
·
Timer delay for each temperature and
humidity output
·
Maximum
current capacity of 10 Amp
·
Heavy-duty
input and output plug and socket wires for durability
·
Equipped
with a 10 Amp circuit breaker switch instead of a short-life fuse
·
Configurable
functionality for humidifying or dehumidifying, and heating or cooling.
Setting Start and
Stop Temperature and Humidity Modes: You can configure the start and stop
temperature and humidity values using this mode. The controller automatically
identifies the heating or cooling mode, as well as the humidifier or
dehumidifier mode.
·
Heating mode: Start temperature is
lower than the stop temperature.
·
Cooling mode: Start temperature is
higher than the stop temperature.
·
Humidifier mode: Start humidity is
lower than the stop humidity.
·
Dehumidifier mode: Start humidity is
higher than the stop humidity.
Temperature and
Humidity Calibration: The controller provides a calibration function for
temperature and humidity readings. You can adjust the values within the range
of -10 to +10, allowing for positive, negative, or zero calibration.
One Set Includes:
·
1 x Humidity and Temperature
Controller
·
Sensor (Temperature and humidity
sensor)
·
1 x Instruction Manual
Plug & Play Temperature & Humidity Controller Buzzer Alarm fr Dehumidifier or Humidifier Greenhouse Pet Animal Attic
- Product Code: PP-DIN302
- Availability: In Stock
-
USD85.00
Related Products
Humidity Controller Alarm Control Switch Relative Moisture, Greenhouse Curing Chamber Greenhouse Dehumidifier Humidifier
Humidity and Temperature Controller – Reliable Environmental MonitoringEnsure optimal temperature ..
USD35.50
Plug & Play Humidity Temperature Controller Buzzer Alarm Moisture and fr Greenhouse Incubator Curing Chamber
This heavy duty plug and play controller serves the purpose of monitoring and controlling temperatur..
USD85.00
Plug & Play Waterproof Temperature Control Box 10-20Amp/120VAC Power Thermostat,Control Cooling or Heating Devices
This heavy-duty plug-and-play temperature controller with a circuit breaker has a wide r..
USD76.00
Digital Humidity & Temperature Controller for controlling Humidifier dehumidifier Chiller Attic Basement Fan with Alarm
Humidity and Temperature Controller – Reliable Environmental Monitoring Ensure opti..
USD35.50
Humidity & Temperature sensor for DTH101 with male connector RJ9 4P4C Sensor
This is Humidity and Temperature sensor for DTH101 with male connector RJ9 ..
USD10.99
Plug & Play Temperature Controller Timer Charcoal BBQ Grill Smoker Stove Oven 15 Amp
This plug and play temperature controller with L shape meat pin point temperature sensor, has ..
USD59.00
Waterproof Temperature Control Box 40Amp/240VAC Control Heat or Cool Devices 2 Hot line fr Spa, Sauna, Hot Tub
This heavy-duty plug-and-play temperature controller has a wide range of applications for cont..
USD115.00
Plug and Play Waterproof Temperature and Humidity Controller Box with Water resistance Sensor
Plug & Play Waterproof Temperature and Humidity Controller BoxFor Controlling Cooling, Heating, ..
USD135.00
Tags: To operate, you only need to plug the humidifier or dehumidifier to the socket wire of the controller at the back, drop the sensor into the place, turn on the power of controller Box and setup the controller to your own requirements.