Digital EGT Temperature Controller °C °F with K Type EGT Probe

Please select LED Color (Red, Blue or Green) before buying the item.

The item has supper mini size 1/32 DIN (1x2x3" or 22.5 x 45 x75mm) for using on any kind of project that need small space like the car panel and Exhaust Gas Temperature (EGT) monitoring, small kilns that has small space for installing temperature controller. 

It can be powered directly by any battery 12-24 VDC.  It shows current temperature and also you can set your alarm temperature or set point too. The device will turn on a red output LED in the front panel to get attention if the temperature is above your set point and also you can set another over alarm for alarm output . So, It has 2 relay switch, one relay output and also one over alarm relay output  that each output switch separately can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan.  The meter will accept almost all type sensors (please check the following table) on the market and display the temperature on Fahrenheit or Celsius. The max temperature range for this device with K type probe is 2372 F (1300 C)

Item includes an EGT K type thermocouple probe.  The probe has 2” long. Cable length(2 meters) with Maximum working temperature: 1832F (1000C) .

 If you need wire for 12-24 VDC wiring please click Here

EGT Probe Specifications:

• Measurement range: 32 - 1800 °F (0 - 1000 °C)
• Thermocouple Type: K Type
• Cable length : 6 ft 
• Sensing tip length: 1.9" (48mm)
• Sensing tip diameter: 0.19" (5mm)
• Thread width :  M8
• Internal Insulation: Fiber Glass
• External shielding: Metal Shield (Stainless steel braided)

Manual