Fahrenheit Celsius Mini Digital Temperature Time Controller Thermostat for Spa, Hot Tub, Pool with Alarm buzzer
This mini Temperature Controller is suitable for any kind of project or system that needs to be temperature controlled between heat and cold automatically or being Refrigeration controlled.
Following you will find some of this controller advantages,
1-it is accurate controller with 0.1C or 0.1F resolution controlling
2-It is compact size and easily can install
3-It has built in relay , so it doesn't need additional relay or SSR.
4-it can be easily programmed and wired
5-it equipped with 2 type of timer for energy saving,
6-Configurable between Fahrenheit or Celsius
7-Equipped with buzzer alarm for high or low temperature alarm setting
When the timer parameter is 0, the timer is off, but if you need to use timer for energy saving, select your needed minute number for timer parameter. When you turn on the controller, so it starts the thermostatic controlling in a set period of time. It is equipped with 2 type timer:
1- timer starts counting down as soon as the controller turns ON and when the time reaches to 0, the controller will turn off the output (hot tub)
2- When the temp reaches to your set point (needed temperature for your hot tub) the timer will start, its timer starts counting down and when the time reaches to 0 minute, the controller will turn the output (hot tub) off. The time control function can be set between 0-999 minutes, depends on the required operation time.
This temperature controller is a top of the line unit that can be used for heating or cooling projects.
We will ship the temperature controller with 110 V or 220 V versions based on the voltage of your countries. For example, if you are customers from United States, Canada, Mexico, Japan, Venezuela and Taiwan, we will ship 110 V versions. For customers from Europe, Australia, New Zealand, most Asian Countries, South America and Africa, we will ship 220 V versions.
Features
-
Mini and light design
-
Large and clear LCD display
-
Temperature Range -50 ~ 110 °C (-58 ~ 230 °F )
-
Dual heating and cooling function
-
Control temperature by setting the temperature set value and the different value
-
Temperature Calibration
- Wiring diagram for installation included
Temperature Controller Specifications
- Temperature Measuring Range: -50 ~ 110 °C (-58 ~ 230 °F )
- Control temperature range: -50 ~ 110 °C (-58 ~ 230 °F )
- Control temperature difference: 0.1 - 25 degree (adjustable)
- Resolution: 0.1 degree
-
Timer : 0-999 minute
-
Sensor error delay: 1 minute
-
Relay contact capacity (Heating or cooling): 10 Amp for 110V and 5 Amp for 220V
-
Compressor delay protection time: 0 ~ 10 minutes (adjustable)
-
Storage Temperature: -30 ~ 75 °C
-
Operating Relative Humidity: 20 ~ 85 % (No condensation)
-
Power Supply: 100-120 V AC/DC (depends on your country)
-
Power consumption: < 2 W
-
Cable length: 3 m (near to 10 feet)
-
Equipped with AH or AL buzzer alarm (Higher or Lower temperature alarm setting)
-
Item dimensions: approx. 75 (W) x 86 (H) x 35 (D) mm (2.95’ x 3.39’ x 1.38’ inch)
-
Item weight: 180 g
Temperature Sensor Specification
- Measurement range: -50 ~ 110 °C (-58 ~ 230 °F )
-
Cable length (L): 10 ft (3m)
-
Sensor type: Water proof NTC sensor (10K)
Wiring:
The unit is a panel mount design with wiring diagram of how to fix the main unit to your application systems.
One Set Included
-
1 x Mini-Temperature Controller
-
1 x Temperature sensor probe with 3m cable
-
1 x Instruction Manual
Temperature Time (Energy Saving) Controller Thermostat Sauna Spa Heat Steamer Hot Tub Jacuzzi Pool °F °C
- Product Code: DIN300A-NTC10
- Availability: In Stock
-
USD38.50