PID Temperature Programmable (Ramp & Soak) Controller with 4-20mA output and universal type input with Fahrenheit and Celsius display
This
controller has one of the complete temperature controllers in the market, it
has a lot of functions like,
-
Configurable between Fahrenheit and Celsius
-
30 Ramps and 30 Soaks and time can configurable between minute and second
-
Equipped with differential gap, decimal point for all input, Auto tuning (with
learning stop or start),alarm output configurable with 8 different options,
system function (heating or cooling),......
Use
this Ramp & Soak PID Programmable
Controller when you wish to precisely control the temperature of a
kiln/heater/cooler on certain timely cycles.
Can
be programmed for multiple profiles up to 60 Ramps
and soaks (30 segments for
Ramp+
30 segments for Soak
).This
controller is easy to program and comes with a user friendly
manual.
Applicable industries:
Annealing, Jewelry, Beer
Brewing, Ceramics, Metallurgy, Petrochemicals, Kiln, Oven,
Furnace and etc.
The item includes: Ramp and soak controller + Manual
Features & Specifications:
- High accuracy
0.2%FS
- Configurable
between Fahrenheit and Celsius
- Up to 60 segments
(30 ramps and 30 soaks)
- Be able to
run/stop/pause/jump the program
- Built-in
Switching Power Supply
- Auto/Manual
control switch from front panel
- Configurable
time-dominate or value-dominate controls
- The time
configurable between minute and second
- Equipped with
differential gap, decimal point for all input, Auto tuning
(with learning stop or start),alarm output
configurable with 8 different options, system function (heating or
cooling),......
Available
Segments |
Up to
60 segments available for a program |
Detective
Temperature Range |
-200 to
1800 °C (depends on input type) |
Patterns |
Be able
to program different patterns with different segments |
Input |
Thermocouple:
(K,S,E,J,T) |
Output |
4-20mA output |
Control
action |
Heating
, Cooling |
Response
time |
Less
than 0.5S (configurable) |
Accuracy |
0.2%FS+-
0.1C(Cu50 cooper resistor compensation or ice point compensation) |
Temperature
drift |
Less
than 0.01%FS 0C (Typical value is 50ppm/0C) |
Resolution |
10C
or 0.10C(automatically change to 10C when the
temperature is higher than 999) |
Display |
Dual
line - four digit - LED display |
Decimal
points |
Configurable
for all inputs |
Control
Method |
ON/OFF AI MPT
with auto tuning, adopting fuzzy logic PID algorithm |
Auto/Manual
Control |
Auto/manual
bump less transfer from front panel |
Auto-tuning |
Auto-tuning
and manual tuning available |
Alarm
Mode |
Absolute
value high limit, Absolute value low limit, Deviation high limit alarm,
Deviation low limit alarm. |
Alarm
stand by |
In some
occasions, for example, in the heating process, when the alarm is set to as
low deviation alarm, right after the power is turned on, the alarm will be
triggered but there is no problem in the system, the alarm block function can
solve this problem. |
Soft
start function |
In some
particular application, 100% output ratio is not allowed when the power just
turned on; soft start function is a great feature to solve this problem. |
Temperature
display unit |
Configurable
between Fahrenheit and Celsius |
Power
Supply |
90~260VAC |
Dimension
(DIN 1/16) |
48mm*48mm*90mm |
Mounting |
Panel
Mount |
Programmable (Ramp & Soak) Digital PID Temperature Controller 60 Segment Time & Temperature Analog Output for Paragon Pottery Ceramic Annealing 1/16 Din
- Product Code:PID-RS-4-20mA
- Availability:In Stock
-
USD70.99